High Containment Docking Systems & Valves 

Two Valves - One System

Contamination control is vital in a wide range of manufacturing operations in the chemical and pharmaceutical industries and above all in powder, granulate and other bulk material handling processes. Niro's Buck docking system satisfies extremely high product containment standards. Buck's proprietary split valve has become the leading product worldwide.

The Buck docking system consists of an active and a passive valve, which together seal two containers. The active valve, operated manually or by an automated system, is mounted on the process station, while the passive valve is fitted on the mobile container. When docked, the two valves are interlocked for complete containment.

Buck® TC Valve Total Containment.
Increasing demands for clean operations during handling of highly sensitive or potent powders require innovative and advanced solutions. Based on the split valve technology of the well known and successfully introduced Buck® HC (High Containment) Valve, the Buck® TC (Total Containment) Valve has been developed for more advanced requirements. Contamination of the environment has been minimised, for handled material as well as for mechanical safety aspects, where no fault operation is feasible, and this has been the key success factor in developing the new Buck® TC Valve (patent pending). The dust emission, during all docking procedure phases of the Buck® TC Valve even reaches nanogramm exposure levels, which until now has been achieved with isolator technologies.
Buck Valve® James Ferry
Buck Valve® James Ferry
 
Buck Docking Systems:
  • Satisfy all GMP and FDA guidelines
  • Validatable for all applications
  • Standard split valves: DN 100, 150, 200, 250, 300
  • Standard material: grade AISI 304 or AISI 316 L stainless steel.
  • EPDM/PTFE, silicon or Viton seals
  • All seals FDA-recognized
Discharging and Dosing
  • Prevents bridging in container for unrestricted product flow at constant rate
  • Fitted between container flange and passive valve
  • Can easily be retrofitted
  • Vibrating rod prevents negative pressure buildup in top part of container
  • Rod also moves product for ventilation and reliable material flow
  • Controlled rate of discharge
  • Weighing device for highly accurate filling or emptying
Cleaning Systems
  • Essential to prevent product contamination
  • FDA validatable
  • Manual or automatic container wash stations for cleaning containers fitted with Buck valves
  • Cross valves for cleaning both sides of the passive valve, all seals and entire container
  • Cleaning-in-place equipment for automatic or manual washing
  • Cleaning-Out-of Place Equipment for removal of parts under contained conditions without the use of tooling.
  • Minimizes plant outages for cleaning
Pharma Charge Drums
  • For transporting agents in small and very small batches
  • For lab or production use or high-containment sampling
  • High-grade stainless or plastic single-use containers in various sizes
  • Highly versatile and built to individual requirements
  • Capacity: 2-50 liters
  • DN 100, 150 or 200 with passive valves
  • Discharge system upon request
  • Viewing port upon request
  • Nitrogen pressurization
  • AISI 304 or 316 L stainless steel or HALAR stainless steel coating
  • EPDM/PTFE, silicon or Viton seals
Feeding and Emptying
  • May retrofit centrifuges, paddle dryers, and double cone dryers
  • Buck docking systems easily integrate into fully automated process systems
  • Eliminates need for operators to enter room for filling and emptying
  • Allows complete automation of the production operation
Dispensing Systems
  • Customized systems to optimize weighing
  • Highly accurate feed weighing for transfer to mixer
  • Precise dosage of all materials to maximum standards
  • For dust-free transfer, container monitoring and container check weighing
  • Formulation management features Interfacing with supervisory, material transfer, and warehouse management computers
Plastic Seed Container
Plastic Seed Container
Plastic Seed Containers

Useful to feed small quantities of materials into blenders or reactors, when there are weight limitations for lifting by employees, when the level of the materials needs to be visible to determine when the container is empty, or when a throw away type container is necessary because validation of CIP is difficult.

  • Made of FDA-approved materials
  • Sanitary in design and construction
  • Can be CIP or SIP
  • Less weight than stainless steel, yet very durable
  • Low price, less expensive than stainless steel
  • Disposable
  • Tamper proof
  • Easily adapted to Buck passive valves
High Containment Systems
  • Designed for worldwide transportation of hazardous solid materials
  • Eliminate all contamination risks
  • Hazardous materials are filled once and emptied once in a high-containment pressurized environment
  • For both continuous and batch operations
  • Certified under UN Code 11A/X
  • Container size: 500 -2,000 liter
  • Filling nozzles with passive valves: DN 100 to DN 300
  • Discharge nozzles: DN 200, DN 250, or DN 300
 Back  Top of page